How important is this? The average home loses about half of its heat through the windows. As you might expect, this leads to bigger heating bills in the winter and larger cooling charges in the summer months. With the right blinds, however, basic heating and cooling costs can be reduced by a third. It is also a cinch controlling the sunshine with wooden blinds.
But which should you buy? Which is better at keeping out the sun and keeping in the heat? That’s not an easy question to answer. Both heavy curtains and wooden blinds are good at their jobs. They are both superior insulators and they can block out the sun with the simple pull of a cord of drawing of the curtains.

In the end, however, we must select wooden blinds as the best window treatment on the market today. These blinds can shut out the sun in an instant and wood is a natural insulator that adds warmth and beauty to any room. And while blinds are not exactly maintenance free, it is nothing compared with curtains, which may be soiled or stained and may require expensive cleaning.
For these reasons and more, we believe that wooden blinds are the most convenient and cost efficient window treatment on the market. Just make certain you take the proper measurements and install the units correctly. It is not at all uncommon for wooden blinds to fall down and break if they are incorrectly installed.

In this article we are going to talk a bit about cleaning wooden blinds. No, it is not nearly as difficult as you might expect. Like most horizontal blinds uk, wooden ones consist of a series of slats that must be cleaned from time to time. If they are not dusted and polished on a regular basis, the wood may fade, become dull and even get scratched.
The number one concern of any homeowner with wooden blinds is dust. Yes, these treatments are virtual magnets for motes of dusts that often swirl around open windows, especially in the spring. That is why you may want to put down an old soiled or unwanted sheet before you start cleaning. Afterwards, you can take the sheet outside and shake it out to get rid of dust and dirt.

What should you use to clean them? Most decorators and home improvement specialists will tell you that you should dust your blinds at least once a week along with the rest of your furniture. This does not have to be a thorough cleaning, but it should involve a duster and maybe even some water spray.  For a more comprehensive cleaning you may want to use the duster or the vacuum at least once every other week. The brush attachment for your vacuum is the perfect tool for cleaning the dust and dirt that will accumulate. A word of warning: do not use wax or regular furniture polish. These sprays will simply seal in the dirt and make it extremely difficult to clean in the future. However, once the blinds to go have been cleaned, often with a damp cloth, it is possible to use a little polish to make your blinds shine.

What to do? The first and most important step is measuring the window. This is something you must do before you actually purchase the blinds direct in the windo. Not surprisingly, the most common reason that blinds are returned is that they are not the right size, as if they had suddenly shrunk or grown after they were purchased. Of course, the explanation for this common mistake is that homeowners don’t know how to take measurements for window treatments. Part of the problem is that there are two popular types of mounts: an inside mount and an outside mount. Let us take a moment to explain the difference between them.

A standard inside mount means that measurements must be taken inside the actual window frame. The handyman or woman should always use a steel tape measure and should round down to the nearest 1/8”. Measurements should be taken and recorded at the top, the centre and the bottom of the inside of the window frame. The number that should be used for the width is the narrowest one. The same should be done for the height—left, right, centre—and the tallest height should be recorded. For the outside mount, homeowners must measure the width of the opening from the outside edge of the window. When these measurements have been recorded, it is common to add at least 3 inches to each side to adjust for the light gap. In closing, it is important to note that the width is always indicated before the height.